Tracking & Go-To Mounts

New version includes built-in USB port.

A versatile astro-imaging and general-purpose mount with a 20kg payload capacity.

• Increased 75 lb load capacity. Exceptional load capacity to weight ratio
• Additional Aux accessory ports and autoguider port on the Dec axis for better cable management
• Larger 144 mm diameter worm wheels to better and more accurately drive heavier loads
• Longer 270 mm dovetail saddle to better support larger optical tubes
• Massive 70 mm stainless steel tripod legs with a wider stance for improved stability under heavy loads
• New accessory tray holds three 1.25” and two 2” eyepieces with an upright stand for your smartphone or tablet
• Heavy duty, 31.5 mm stainless steel counterweight shaft to support additional counterweights
• Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
• Internal cabling for worry-free remote operation. Power input and lower accessory ports remain stationary while the mount slews to avoid snags
• Includes Celestron's new PWI telescope control software, co-developed by PlaneWave Instruments. Software features multi-point mount modeling for extremely precise pointing accuracy
• Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
• Integrated handles for easy transport and portability
• All-new ergonomically designed dovetail clamping knobs

• Holds a maximum instrument capacity of 30 lbs (13.6kg)
• Integer gear ratios and permanently programmable Periodic Error Correction eliminates recurring track errors from the worm gear
• New motors offer improved tracking performance & provide more power to overcome load imbalances
• Updated industrial design offers more rigidity, less flexure and improved aesthetics
• New design allows viewing or imaging across the meridian without interference from the motors housings
• Improved latitude range - can be used between 7 – 77° latitude
• Improved electronics with increased memory for future expansion
• NexStar+ hand control offers multiple language programming (English, French, Italian, German, Spanish)

• 8” (2032 mm) f/10 Edge HD  includes StarBright XLT coatings for better light transmission
• Edge HD optical design fully corrects for coma and field curvature, delivering a truly flat field
• Built-in tube vents with integrated 60 micron mesh filters allow hot air to be released behind the primary mirror
• The secondary mirror can be removed to allow the installation of Hyperstar and Fastar for fast F/2.8 imaging
• 9x50 optical finderscope for locating alignment stars
• Integer gear ratios and permanently programmable Periodic Error Correction eliminates recurring track errors from the worm gear.
• Autoguider port for long exposure imaging
• New motors offer improved tracking performance & provide more power to overcome load imbalances
• Updated industrial design offers more rigidity, less flexure and improved aesthetics
• New design allows viewing or imaging across the meridian without interference from the motors housings
• Improved latitude range.  Can be used between 7 – 77° latitude.
• NexStar+ hand control offers multiple language programming (English, French, Italian, German, Spanish)

• Load rated capacity to 55 lbs (25kg)
• Heavy Duty belt-drive system minimizes backlash while providing smooth motor operation under heavy loads
• Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
• Internal cabling for worry-free remote operation. Power input and accessory ports remain stationary while the mount slews to avoid snags
• Control software developed in conjunction with PlaneWave Instruments for professional level control operation and imaging
• Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
• 2" steel legs with height index marks for quick leveling
• Two handles for easy pickup and transport
• All-new ergonomically designed dovetail clamping knobs
• All-new ergonomic latitude adjuster for smooth and easy adjustment under full loads

SKY-WATCHER GTI GOTO MOUNT WIFI WITH STEEL TRIPOD AND EXTENSION TUBE

The EQM35 mount is ideal for astronomers taking the next steps in visual observing and astrophotography.

This high precision, easy to use Goto tracking mount will allow more seasoned users to appreciate extra load carrying capacity for visual use and ability to convert into a DSLR mount.

The included SynScan Wi-Fi dongle allows for wireless control through the SynScan Pro app for Apple, Android, or Windows devices. The user-friendly menu system allows automatic slewing to over 42,900+ objects after a simple two-star alignment procedure is performed. A hand controller (sold separately) can also be used.

NOTE: The WIFI EQ35 model excludes the hand controller, control is only via the WiFi / APP.

• Built-In Wifi
• 11 lb Payload Capacity
• Ball Head Adapter Included
• Selectable Tracking Speeds

NOTE: This is the mount and Ballhead adapter only. 

The Tripod, Wedge, L Bracket and Counterweight are all optional accessories. Camera is also not included.

The EQ8-RH provides the next generation of Sky-Watcher’s popular high capacity mount, the EQ8.

The R models offer a refined design to allow for better balance and more modern features to cater to today’s high end imagers.