Mounts and Tripods

• Holds a maximum instrument capacity of 30 lbs (13.6kg)
• Integer gear ratios and permanently programmable Periodic Error Correction eliminates recurring track errors from the worm gear
• New motors offer improved tracking performance & provide more power to overcome load imbalances
• Updated industrial design offers more rigidity, less flexure and improved aesthetics
• New design allows viewing or imaging across the meridian without interference from the motors housings
• Improved latitude range - can be used between 7 – 77° latitude
• Improved electronics with increased memory for future expansion
• NexStar+ hand control offers multiple language programming (English, French, Italian, German, Spanish)

• Load rated capacity to 55 lbs (25kg)
• Heavy Duty belt-drive system minimizes backlash while providing smooth motor operation under heavy loads
• Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
• Internal cabling for worry-free remote operation. Power input and accessory ports remain stationary while the mount slews to avoid snags
• Control software developed in conjunction with PlaneWave Instruments for professional level control operation and imaging
• Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
• 2" steel legs with height index marks for quick leveling
• Two handles for easy pickup and transport
• All-new ergonomically designed dovetail clamping knobs
• All-new ergonomic latitude adjuster for smooth and easy adjustment under full loads

• 8” (2032 mm) f/10 Edge HD  includes StarBright XLT coatings for better light transmission
• Edge HD optical design fully corrects for coma and field curvature, delivering a truly flat field
• Built-in tube vents with integrated 60 micron mesh filters allow hot air to be released behind the primary mirror
• The secondary mirror can be removed to allow the installation of Hyperstar and Fastar for fast F/2.8 imaging
• 9x50 optical finderscope for locating alignment stars
• Integer gear ratios and permanently programmable Periodic Error Correction eliminates recurring track errors from the worm gear.
• Autoguider port for long exposure imaging
• New motors offer improved tracking performance & provide more power to overcome load imbalances
• Updated industrial design offers more rigidity, less flexure and improved aesthetics
• New design allows viewing or imaging across the meridian without interference from the motors housings
• Improved latitude range.  Can be used between 7 – 77° latitude.
• NexStar+ hand control offers multiple language programming (English, French, Italian, German, Spanish)

• Increased 75 lb load capacity. Exceptional load capacity to weight ratio
• Additional Aux accessory ports and autoguider port on the Dec axis for better cable management
• Larger 144 mm diameter worm wheels to better and more accurately drive heavier loads
• Longer 270 mm dovetail saddle to better support larger optical tubes
• Massive 70 mm stainless steel tripod legs with a wider stance for improved stability under heavy loads
• New accessory tray holds three 1.25” and two 2” eyepieces with an upright stand for your smartphone or tablet
• Heavy duty, 31.5 mm stainless steel counterweight shaft to support additional counterweights
• Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
• Internal cabling for worry-free remote operation. Power input and lower accessory ports remain stationary while the mount slews to avoid snags
• Includes Celestron's new PWI telescope control software, co-developed by PlaneWave Instruments. Software features multi-point mount modeling for extremely precise pointing accuracy
• Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
• Integrated handles for easy transport and portability
• All-new ergonomically designed dovetail clamping knobs

Turn your saxon EQ3 mount into a Go-To with this kit

• Equatorial wedge for Celestron NexStar 6/8SE and Evolution Alt-Az mounted computerized telescopes
• Enables long exposure astrophotography and autoguiding by tilting the telescope’s azimuth into an equatorial platform allowing it to track an arc around the polar axis.
• For beginner to intermediate planetary and deep space imagers
• Captive hardware, tool-less operation, easily adjusts under load
• All new hefty yet portable design
• Sturdy latitude adjustment screw with easy to read scale and integrated Bubble level

• Custom made for CGX and CGX-L Mounts
• Adjustable bracket angle for best accessibility
• 6x magnification
• Simple reticle map easily locates the celestial pole without the need to reference an app or location & time
• Scope tilt is adjustable to allow for accurate polar alignment