The kit includes 2 zip-ties, anti-dew heater strip, Y power cord and two spacers.
The thickness of the anti-dew heater strip is 0.2~0.3mm.
The “Y” power cord is designed to connect in-line with the cooler power supply for convenience.
The thickness of the spacers is 0.3mm and 0.5mm. They are used for aligning the camera and EFW.
We recommend a 12V at 0.35A DC adapter where the heating power on the strip is ~4.2 watts. You can use the same power cord to power both the fan and heater simultanously, but make sure not to exceed recommended amount of Ampere.
How to use:
- Remove the protective film on the adhesive tape
- Put the anti-dew heater strip on the front face of the camera and make sure the black cable is in the right position (lying next to the DC plug at the rear end)
- Tie the black cable with a zip-tie on the camera body
- Plug in the power cord