Equatorial Mounts

The EQ8-RH provides the next generation of Sky-Watcher’s popular high capacity mount, the EQ8.

The R models offer a refined design to allow for better balance and more modern features to cater to today’s high end imagers. 

The EQ8-R provides the next generation of Sky-Watcher’s popular high capacity mount, the EQ8. 

The R models offer a refined design to allow for better balance and more modern features to cater to today’s high end imagers. 

The EQ8-R provides the next generation of Sky-Watcher’s popular high capacity mount, the EQ8.

The R models offer a refined design to allow for better balance and more modern features to cater to today’s high end imagers. 

• 5” (125 mm) f/10 Schmidt-Cassegrain includes StarBright XLT coatings for better light transmission
• The most compact and portable of Celestron’s German equatorial mounts offers the same rigidity as our larger mounts with minimal flexure and an improved industrial design
• Holds a maximum instrument capacity of 30 lb
• Every feature an astroimager wants: PEC, an autoguider port, the ability to image across the meridian, and more
• NEW dual saddle plate is compatible with narrow CG-5 dovetails and wider CGE dovetail. Also compatible with Vixen format dovetails longer than 100mm, but not compatible with Losmandy D format plates.
• Latitude range allows the mount to perform between 7° and 77° latitude

• Combination German Equatorial Mount, Alt-Az Mount and portable DSLR tracker
• Quick conversion between mount configuration modes
• Adjustable steel tripod with an accessory tray
• Optional Sky-Watcher Wifi Adapter replaces handset for full mount control via iPhones, iPads & Android devices
• Improved worm gear with 40% more for teeth for smoother tracking
• Better PEC (Periodic Error Correction) for more accurate long exposure guiding
• Die cast ZL102T0 aluminum body for more rigidity while minimizing weight
• V style telescope connection
• 5 Years Sky-Watcher Limited Warranty

• 40 lbs payload capacity
• Dual-fit Vixen/CG-5 and Losmandy/CGE dovetail saddle
• 2" steel legs with height index marks for quick leveling
• USB 2.0 port on hand control for direct links to a PC via ASCOM supported software.
• Internal cabling throughout for worry-free remote operation
• Low cog DC Servo motor with integrated optical encoders offer smooth, quiet operation
• Built-in polar alignment program to polar align on any star in the sky
• Longer clutch levers to make tightening and loosening of clutches easier

• Increased 75 lb load capacity. Exceptional load capacity to weight ratio
• Additional Aux accessory ports and autoguider port on the Dec axis for better cable management
• Larger 144 mm diameter worm wheels to better and more accurately drive heavier loads
• Longer 270 mm dovetail saddle to better support larger optical tubes
• Massive 70 mm stainless steel tripod legs with a wider stance for improved stability under heavy loads
• New accessory tray holds three 1.25” and two 2” eyepieces with an upright stand for your smartphone or tablet
• Heavy duty, 31.5 mm stainless steel counterweight shaft to support additional counterweights
• Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
• Internal cabling for worry-free remote operation. Power input and lower accessory ports remain stationary while the mount slews to avoid snags
• Includes Celestron's new PWI telescope control software, co-developed by PlaneWave Instruments. Software features multi-point mount modeling for extremely precise pointing accuracy
• Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
• Integrated handles for easy transport and portability
• All-new ergonomically designed dovetail clamping knobs

• 8” (203.2 mm) f/10 Schmidt-Cassegrain includes StarBright XLT coatings for better light transmission
• 84% more light gathering than a 6” telescope.
• 6x30 optical finderscope for locating alignment stars
• Integer gear ratios and permanently programmable Periodic Error Correction eliminates recurring track errors from the worm gear.
• Autoguider port for long exposure imaging
• New motors offer improved tracking performance & provide more power to overcome load imbalances
• Updated industrial design offers more rigidity, less flexure and improved aesthetics
• New design allows viewing or imaging across the meridian without interference from the motors housings
• Improved latitude range.  Can be used between 7 – 77° latitude.
• NexStar+ hand control offers multiple language programming (English, French, Italian, German, Spanish)

The Saxon EQ3 Mount with Steel Tripod is the ideal and recommended entry equatorial mount for avid astromoners who want to enjoy accurate manual tracking of the night sky or may want to start their journey into basic astro imaging.

This mount is ideally suited to a 90 - 100mm refractor, 150DS Saxon reflector or even a 150mm SCT OTA.

The EQ3 is great quality and comes with a 3 year limited warranty.

The EQ3 is great for beginners or for the astronomer that likes to travel with a light kit, but needs the precision and stability needed for serious observing.