Something Special

• 8” (203.2 mm) f/10 Schmidt-Cassegrain includes StarBright XLT coatings for better light transmission
• 84% more light gathering than a 6” telescope.
• 6x30 optical finderscope for locating alignment stars
• Integer gear ratios and permanently programmable Periodic Error Correction eliminates recurring track errors from the worm gear.
• Autoguider port for long exposure imaging
• New motors offer improved tracking performance & provide more power to overcome load imbalances
• Updated industrial design offers more rigidity, less flexure and improved aesthetics
• New design allows viewing or imaging across the meridian without interference from the motors housings
• Improved latitude range.  Can be used between 7 – 77° latitude.
• NexStar+ hand control offers multiple language programming (English, French, Italian, German, Spanish)

• 9.25" HD Optical Tube Assembly
• CGX EQ Mount and Tripod
• Celestron’s premium StarBright XLT coatings provide maximum light transmission
• A 9x50 finderscope, 2” mirror diagonal for more comfortable viewing, and wide-angle 23 mm Luminos 2" eyepiece are all included

For customers wishing to fit solar filters, the outside OTA diameter is 272 mm.

NOTE: For solar viewing the Astrozap Glass Solar filter (Product No. 124446) is recommended.

• 8” (2032 mm) f/10 Edge HD  includes StarBright XLT coatings for better light transmission
• Edge HD optical design fully corrects for coma and field curvature, delivering a truly flat field
• Built-in tube vents with integrated 60 micron mesh filters allow hot air to be released behind the primary mirror
• The secondary mirror can be removed to allow the installation of Hyperstar and Fastar for fast F/2.8 imaging
• 9x50 optical finderscope for locating alignment stars
• Integer gear ratios and permanently programmable Periodic Error Correction eliminates recurring track errors from the worm gear.
• Autoguider port for long exposure imaging
• New motors offer improved tracking performance & provide more power to overcome load imbalances
• Updated industrial design offers more rigidity, less flexure and improved aesthetics
• New design allows viewing or imaging across the meridian without interference from the motors housings
• Improved latitude range.  Can be used between 7 – 77° latitude.
• NexStar+ hand control offers multiple language programming (English, French, Italian, German, Spanish)

The Celestron CGX-L Equatorial Mount and Tripod is a heavy-duty computerized mount built for serious astrophotographers and backyard observatory setups. With a generous 75 lb load capacity, massive 70 mm stainless steel tripod legs, and internally routed cabling for snag-free remote operation, it delivers exceptional stability and precision tracking for even the largest optical tubes and imaging rigs.

• Increased 75 lb load capacity. Exceptional load capacity to weight ratio
• Additional Aux accessory ports and autoguider port on the Dec axis for better cable management
• Larger 144 mm diameter worm wheels to better and more accurately drive heavier loads
• Longer 270 mm dovetail saddle to better support larger optical tubes
• Massive 70 mm stainless steel tripod legs with a wider stance for improved stability under heavy loads
• New accessory tray holds three 1.25” and two 2” eyepieces with an upright stand for your smartphone or tablet
• Heavy duty, 31.5 mm stainless steel counterweight shaft to support additional counterweights
• Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
• Internal cabling for worry-free remote operation. Power input and lower accessory ports remain stationary while the mount slews to avoid snags
• Includes Celestron's new PWI telescope control software, co-developed by PlaneWave Instruments. Software features multi-point mount modeling for extremely precise pointing accuracy
• Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
• Integrated handles for easy transport and portability
• All-new ergonomically designed dovetail clamping knobs

• Load rated capacity to 55 lbs (25kg)
• Heavy Duty belt-drive system minimizes backlash while providing smooth motor operation under heavy loads
• Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
• Internal cabling for worry-free remote operation. Power input and accessory ports remain stationary while the mount slews to avoid snags
• Control software developed in conjunction with PlaneWave Instruments for professional level control operation and imaging
• Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
• 2" steel legs with height index marks for quick leveling
• Two handles for easy pickup and transport
• All-new ergonomically designed dovetail clamping knobs
• All-new ergonomic latitude adjuster for smooth and easy adjustment under full loads