**Sirius Optics is still open for business. As the situation is changing on a daily basis, check our website for the most up to date information.**

Visit this page for updates on the measures we are taking to combat COVID-19.

Starting Monday 27th April we will be introducing new shop hours and will open from 10am to 5.30pm Monday to Friday and from 9am to 2pm Saturdays. Closed Sundays.

ZWO 1600MM Pro Mini Kit 2

More Views

ZWO 1600MM Pro Mini Kit 2
AUD $2,999.00

Availability: Backorder Available

Mini Kit 2:

ASI1600MM Pro Astronomy Camera

1.25″ mini Electronic Filter Wheel

31mm LRGB Filter Set
Download PDF




ASI1600MM Pro


ASI1600 Pro camera includes a 256MB DDR3 memory buffer to help improve data transfer reliability. Additionally, the use of a memory buffer minimizes amp-glow, which is caused by the slow transfer speeds when the camera is used with a USB 2.0 port.

ASI1600 Pro offers very good performance for astrophotography. Low read noise, low dark current and high dynamic range.

ASI1600 builds in a 12bit ADC, but can provide 12.5 stops dynamic range which is even better than KAF8300 due to its super low read noise.

There are four screws that seal the sensor chamber. The camera design has been extensively tested and is very stable.

Even when used in higher humidity environments, ASI1600 Pro will still works fine without dew problems.

USB 3.0 Port: Provides 5Gb bandwidth to make it possible for ASI1600 Pro to run at 14.7 fps (12bit, normal mode) or 19 fps (23bit, high speed mode) at full resolution (11.7Mega).
We recommend using a 12V/3-5A or more DC adapter for cooler power supply (2.1×5.5, center positive).
Using a battery with 9-15V is also suitable for the cooler power supply.
USB 2.0 HUB: Can connect with various accessories,  including a filter wheel, guide camera or electronic focuser, allowing you to manage your cables better. There are two short 0.5m USB2.0 cables included with the ASI1600 Pro. The hub is powered by the external power supply if you connect one.

ASI1600 Pro has a 2 stage TEC cooling system to enable very deep cooling (40°C-45°C below ambient). The cooler requires an external power supply, which is not included with the camera.





Only 300g! Smaller than your hand. Very thin design, 20mm width. The body is CNC machined from a full block of aircraft grade aluminium. 

The step motor is the heart of the EFWmini, which is made by NPM from Japan. You can trust its quality and relability.

Supports both 5 x 1.25″ filters or 5 x 31mm filters. The Electronic Filter Wheel can be rotated in both counter clockwise or clockwise direction for filter selection.

One USB cable is enough to power up the EFW, the max power consumption is around 120ma@5V, so you can connect it from the USB2.0 hub of ZWO cooled cameras.

The distance between the filter and sensor is aroucnd 10mm when you connect it to ASI1600.

1.25″ filters won’t have vignetting with up to F/5 focal ratio scopes, and 31mm filters won’t have vignetting up to F/2 lenses.




Additional Information

Specifications No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.